You sure can! The replacement bracket kit for the Optronics LED Off-Road Light Bar # UCL22CB is found as part # BK20BB on our site. view full answer...
The Optronics LED Off-Road Light Bar # UCL22CB uses universal mounting feet so you will be able to use this on your 2015 Subaru Crosstrek. It does not have a curve to it but that won't be a problem. However, I do recommend measuring to make sure you have the space to mount it where you want. This light bar measures 33" long x 3-1/5" tall x 3-1/2" deep. view full answer...
We do not actually offer HID (High Intensity Discharge arc lamp type) vehicle lights but usually there will be a number code or some other brand or part reference on the item to tell you what light-producing element it uses, if it is replaceable. Your lights could potentially use either DOT-compliant (street legal) bulbs or they could have "off-road" bulbs that are too bright for legal use on public roads. Many HID products will not be street legal.
If you click on the linked page you'll... view full answer...
Numbers on trailer light lenses usually refer to DOT codes, not the light manufacturer's actual part number for the item. The light part number is usually on the light's base, which typically is less likely than the lens to be damaged or to pop off while you're going down the road.
On the two linked pages you can see all of our light gaskets like # A42GB and light mounting grommets like # A45GNB. view full answer...
Lights with separate switches is probably the best option to prevent the failure at the switch you encountered. Also, manufacturers are going to tell you not to power wash any lights like these. Even if they are waterproof and submersible they aren't designed to hold up to the force from power washing.
The # ILL70CSB is sealed and waterproof. Optronics does a good job with their waterproofing so even with the built in switch I doubt you will have an issue if you choose to use it.
The... view full answer...
Since your trailer light does not have a license plate bracket below it you would not need the lens that has the clear section on the bottom for the license plate light like part # AST61B.
Instead you would want the part # AST60B. view full answer...
Since the factory circuit was rated for a maximum of 20 amps, and the Putco # P231920 Driving Lamps will not draw over that, so you could certainly install them using the existing factory circuit and wiring.
Keep in mind that the original lights might have been removed due to a wiring problem, so you should not assume that the existing wiring is in good condition. I would recommend examining the circuit, if possible. view full answer...
We have a number of great replacement light options for you. All of the headlight LED bulbs we offer for the 2005 Mini Cooper S do not comply with DOT standards. These lights are intended for off-road use only.
If you already have LED lights but are looking to upgrade, we offer the CIPA EVO Formance bulbs in 1157 Round LED Bulbs, Ultra White # CM93236 and in 1157 Round Bulbs, Cold Blue # CM93233. If your Cooper S does not use 1157 round LED bulbs, we offer a number of other size replacement... view full answer...
We do indeed sell the replacement handle for the Extreme Off-Road Ratcheting Trailer Jack # ORJW1SU; the correct part is the following:
- Replacement Jack Handle for Extreme Off-Road Trailer Jack # ORJW53SH view full answer...
Yes, we do carry the replacement wheel you are needing for your Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels # ORJW350D.
- Replacement 6" Caster Wheel for Ark Xtreme Off-Road Swing-Up Trailer Jack # ARK27FR view full answer...
Using the 7 and 4-Way trailer connector, # HM40975-11998, is a good idea if the harness that plugs into the factory 7-Way also was damaged. Because one end of the harness included with the connector just has blunt cut wires, you will need to wire them in to the vehicle wiring by function as follows (the colors listed below are the harnesses colors, you will need to use a circuit tester such as # PTW2992 to determine the appropriate wire on the vehicle tow package wiring harness):
Red is... view full answer...
I may have an option for you but the Pilot Magnetic Tow Lights - Red LEDs - 4-Way Flat and 7-Way RV Connector - Wireless # NV-5164 are no longer available. You would have to purchase different product to replace them.
The option I have for you is the Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector # TL21RK. The # TL21RK are a lower profile light, and will hopefully lessen the possibility of losing your lights to the Michigan roads. view full answer...
For your Removeable Extreme Off-Road Swing-Up Trailer Jack # ARK57FR the only replacement parts we offer are:
-The Replacement Jack Handle for Extreme Off-Road Trailer Jack # ORJW750SH.
&
-The Replacement Cap for Ark Extreme Off-Road Trailer Jack # ARK64FR.
Unfortunately, the wheel is not one of those replaceable items, so your option would be a full replacement. view full answer...
Yes, the Replacement Jack Handle for Ark Xtreme Off-Road Trailer Jack # ORJW750SH will work as a spare handle. This is a direct replacement for the handle on the # ORJW750D which is the same as your # ORJW750BD aside from the color. view full answer...
The Superwinch Tiger Shark Off-Road Winch part # SW1513200 draws 120 amps at 0 lbs and 370 amps at 13,500 lbs. I called my contact at Superwinch and they started to use part # SW90-22147 which is rated for up to 230 amps however, since it is a thermal resetting circuit breaker it is not the amperage that will trip the breaker but rather the heat. view full answer...
We do have an axle-less system that will provide your 2022 Rockwood Mini Lite with additional clearance. The Timbren Axle-Less Trailer Suspension System is what you need. Based on what I have found, you have 3,500 lb axles on your travel trailer. I recommend verifying this information to be sure. Assuming that is correct we have the following options:
-Heavy-Duty 2" Lift Spindle - Standard Tires # TASR35HDS07
-Heavy-Duty 2" Lift Spindle - Off-Road Tires # TASR35HDS06
-Heavy-Duty 4" Lift... view full answer...
I have another option for you, but there is not a trailer coupler that already has a 2" receiver tube for installing an off-road coupler like the Ark Articulating Off-Road Coupler for 2" Receivers - Trailer Side - 2" Ball # AR44FR you were looking at.
Instead you will need to have a coupler like the # 337RT25806B welded to the tongue of your trailer for the AR44FR to install into, and install the included 2" hitch ball onto the ball mount on your tow vehicle.
I included videos for each... view full answer...
We have the Replacement Jack Handle # ORJW750SH which will fit your Xtreme Off-Road Swing-Up Trailer Jack # ORJW750BD. This handle has a zinc finish as opposed to the black finish on your jack. view full answer...
Yes, we do have the Orion Emergency 30-Minute Road Flares # RN3073-01 sold in a 3-pack. These will replace the flares in the Kit # RN6030-01.
You might consider switching to the LED Road Flares # SA54FR. This kit includes 3 lights which you can attach to your vehicle with the built in magnets. These lights have a run time between 3 and 41.5 hours depending on what mode you have the lights set. Each light requires 3 AAA Batteries and we have the Duracell Optimum # DU26QR available in a 6-pack. view full answer...
Your Westlake ST235/75R15 Radial Off-Road Trailer Tires - Load Range D # WST54FR are designed to perform off-road and on the highway. Unlike standard trailer tire tread, the deep, rugged tread on these tires channels water away so that the tire makes better contact with the road.
This greatly improves traction during wet, snowy, or icy conditions. Because of this, the tire is specifically designed for off-roading on uneven terrain such as mud, sand, and grass, although it performs well... view full answer...
Go To Results